Just Add Ink #579 - Just Choose Two

Hi everyone, I am playing along with the challenge this week at Just Add Ink.  We just needed to add two of either Foil, Glimmer or Shimmer

I have used the Ever Eden Specialty Designer Series Paper along with the Poinsettia Dies and the Poinsettia Petals stamp set.

I have used Gold Foil Sheet for the foliage sprigs and the Shimmer is in the Gold Shimmer ribbon.  There is also some further Glimmer in the Ever Eden Specialty Designer Series Paper with the touch of gold foiling in the images in the paper.  

Footnote to this post:

I was lucky enough to be selected as this week's winner.

Hope you enjoy this project.

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Just Add Ink #579 - Just Choose Two

Merry Christmas

Hi everyone, I am sharing a card I made using the gorgeous Ever Eden Designer Series Paper which is available to purchase on the 2 November 2021.  I also used the Poinsettia Petals stamp set and the coordinating Poinsettia Dies.

I have used a standard card base and cut the Designer Series Paper and Gold Foil Sheet at:

• Soft Succulent/Basic Black pattern - 10.5cm x 2cm
• Gold Foil Sheet - 10.5cm x 1.5cm
• Leaf pattern - 10.5cm x 5.1cm

These pieces were adhered together and the adhered to the card front.  Take note that I only left a very small strip of the Gold Foil Sheet showing, I only wanted a hint of the gold on these layers.

Stamp the Merry Christmas on the bottom portion of the card using Evening Evergreen ink.

Die cut the Poinsettia Flower from Basic White cardstock, the Holly Leaves from Evening Evergreen cardstock and the foliage sprigs from Gold Foil Sheet.  The flower centre was cut from a piece of Gold Foil Sheet with some Pearl Basic Jewels added to this.

Adhere all the Poinsettia Flower pieces together, I used Multipurpose Liquid Glue for this.

Cut a piece of 3/8" Gold Shimmer Ribbon 21 cm long.

Adhere the Holly Leaves and Gold Foliage pieces in place and add the piece of Gold Shimmer Ribbon  before adhering the Poinsettia Flower.  

Add some Gold Metallic Pearls to finish the card front.

For the card inside, cut a piece of Evening Evergreen cardstock at 10cm x 14.3cm and a piece of Basic White Cardstock at 9.5cm x 13.8cm.  Stamp the small foliage sprig on the bottom right corner using Evening Evergreen ink.  Adhere the Basic White cardstock piece to the Evening Evergreen mat and then adhere to the card inside.

Hope you enjoyed this project.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn 

Share:facebook - twitter - pinterest

Merry Christmas

Feels Like Frost Designer Series Paper - Day 11

Hi everyone, welcome to Day 11 of the Feels Like Frost Designer Series Paper projects.

I have chosen this piece of patterned paper for today's cards.

I have used the Itty Bitty Christmas stamp set along with the Poinsettia Dies, Stitched So Sweetly Dies and Ornate Frame Dies.

The card base is Whisper White Thick cardstock.  The patterned paper from the Feels Like Frost Designer Series paper is matted onto a piece of Basic Black cardstock cut at 5.5cm x 14.8cm (or 2 1/4" x 5 1/2") and then adhered to the card front.

The Basic Black Stitched Scalloped Rectangle is cut using the largest die in Stitched So Sweetly Dies.  A piece of Whisper White cardstock was cut at 9.2cm x 6cm (or 3 5/8" x 2 3/8") and then embossed using the Dainty Diamonds 3D Embossing Folder.

The poinsettia and foliage were cut using the Poinsettia Dies.  The sentiment was white heat embossed on a piece of Basic Black cardstock before being cut using the die from the Ornate Frames Dies.  Some of the Wonderful Gems were added to finish the card front.

Metric Measurement cutting guide.

Imperial Measurement cutting guide.

Hope you enjoyed the projects from Day 11 of the Feels Like Frost Designer Series Paper projects.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Feels Like Frost Designer Series Paper - Day 11

Feels Like Frost Designer Series Paper - Day 9

Hi everyone, welcome to Day 9 of the Feels Like Frost Designer Series Paper projects.

I have chosen this piece of patterned paper for today's cards

The stamp set used is the Itty Bitty Christmas along with the Poinsettia Dies, Ornate Layers Dies and Layering Squares Dies.

The piece of Whisper White cardstock was cut at 8cm x 14.8cm (or 3 1/8" x 5 1/2") and embossed using the Dainty Diamonds 3D Embossing Folder.  Two strips of Silver Foil Sheet were added top and bottom to this piece before adhering to the Misty Moonlight card base with Dimensionals.

The small squares of patterned paper were adhered to Scalloped Squares cut from Misty Moonlight cardstock and the 4th smallest Scalloped Square Die in the Layering Squares Dies.  These were then adhered to the card front.

The sentiment panel was cut using the Ornate Layers Dies and Whisper White cardstock.  The sentiment was stamped using Misty Moonlight ink.  The foliage pieces behind the sentiment panel were cut using Silver Foil Sheet, Vellum Cardstock and Poinsettia Dies.  A piece of the Seaside Spray Metallic Ribbon was adhered behind the sentiment panel before the panel was adhered to the card front using Dimensionals.  A few Rhinestone Basic Jewels were added to finish the card front.

The long strips can be used to decorate the inside of the cards or discarded, the choice is your.

You will get 5 of these cards from the one sheet of patterned paper from the Feels Like Frost Designer Series Paper Pack.  You will get 21 cards from the 4 sheets of patterned paper in the pack.

Metric Measurement cutting guide.

Imperial Measurement cutting guide.

Hope you enjoyed today's projects.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Feels Like Frost Designer Series Paper - Day 9

Feels Like Frost Designer Series Paper - Day 5

Hi everyone, welcome to Day 5 of the Feels Like Frost Designer Series Paper projects.

I have chosen this piece of patterned paper for today's cards.

For this card I have used the Perfectly Plaid stamp set, Poinsettia Dies, Stitched So Sweetly Dies and Sprig Punch.

This piece of pattern paper is so pretty and it does all the work for you.  I kept the sentiment panel quite simple at the top of the card so that you can see the best of the picture in the paper.

The 'Merry Christmas' from the Perfectly Plaid stamp set was stamped using Misty Moonlight ink on a piece of Whisper White cardstock and the die cut using the Stitched So Sweetly dies.  I added a silver berry foliage piece cut from Silver Foil Sheet and the die from the Poinsettia dies.  Two Vellum sprigs were also added, these were punched using the Sprig Punch.  To finish off a piece of Seaside Spray Metallic Ribbon was adhered behind the sentiment panel and a few Rhinestones added for a little bling.

To decorate the inside of the card I stamped the solid tree image from the Perfectly Plaid stamp set.

This is the Metric Measurement cutting guide.

This is the Imperial Measurement cutting guide.

For the Imperial Measurement you will have a 1/2" strip left.  You can use this to decorate the inside of the card instead of the trees.

I love these finished cards and I know it is because of the gorgeous picture in the paper.  They are quite quick and easy to make.  You can make 8 of these cards from the 4 sheets of the patterned paper in the Feels Like Frost Designer Series Paper Pack.

Hope you enjoyed today's project.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Feels Like Frost Designer Series Paper - Day 5

Feels Like Frost Designer Series Paper - Day 3

Hi everyone, welcome to Day 3 of the Feels Like Frost Designer Series Paper projects.  

For today's cards this is the piece of pattern paper I have used.

You will get 2 of these cards from the piece of patterned paper, so this is 8 of these cards from the 4 sheets of Feels Like Frost Designer Series Paper.

The 2 pieces were cut at 11.8cm x 7.5cm which left a long strip that was cut at 10cm x 1.7cm which I used to decorate the inside of the card.

This is the Metric measurement cutting guide.

This is the Imperial measurement cutting guide.

The stamp set used is Itty Bitty Christmas with the foliage pieces from the Poinsettia Dies.  The centre panel was cut using the Ornate Layers Dies.  Some of the gorgeous Seaside Spray Metallic Ribbon was added behind the centre sentiment panel.  To finish the card a few Rhinestones were added.

Hope you enjoyed the projects from Day 3 of the Feels Like Frost Designer Series Paper projects.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Feels Like Frost Designer Series Paper - Day 3

Feels Like Frost Designer Series Paper - Day 2

Hi everyone, projects for Feels Like Frost Designer Series Paper - Day 2.

For my projects on Day 2 I decided to use the Silver and White striped side of this piece of Designer Series Paper.

I have used the Itty Bitty Christmas stamp set and Poinsettia Dies for this card.  The embossing folder used is the Dainty Diamonds 3D from from the Annual Catalogue.

The Designer Series Paper was cut at 14.8cm (this is the width of the card base in landscape orientation) x 5cm.  You will get 3 cards from one sheet of paper, so this is 12 cards from the 4 sheets of this pattern paper in the Feels Like Frost Designer Series Paper Pack.

I matted the pieces of Designer Series Paper onto a piece of Basic Black cardstock cut at 14.8cm x 5.4cm.  I love this little pop of black along with the sentiment.  The sentiment panel was cut using the Ornate Frames Dies.

This is the Metric Measurements cutting guide.

This is the Imperial Measurement cutting guide.

The piece of Whisper White cardstock that has been embossed with the Dainty Diamonds 3D Embossing Folder is cut at 11.5cm x 6.3cm for Metric measurements or 4.5" x 2.5" for Imperial measurements .  I rounded the corners using the Detailed Trio Punch.  This piece was adhered to the card front using Dimensionals.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Feels Like Frost Designer Series Paper - Day 2

Feels Like Frost Designer Series Paper - Day 1

Hi everyone, I have had a pack of the Feels Like Frost Designer Series Paper sitting in my stash for a while now so I set myself a little challenge to see what I could create with it.  So over the next 12 days I will be posting the cards that I made from each sheet and the cutting instructions.  In the paper pack you get 4 sheets 6" x 6"of 12 different designs, so this is a lot of cards. 

Sit back and enjoy what I have created.

For Day 1 the sheet of pattern paper I have chosen does a lot of the work for you.  It is so pretty.

This is the reverse side.  Each piece of paper has a picture on one side and a Silver and White pattern on the other. 

These are my cards.  You will get 4 of Card 1, 4 of Card 2 and 6 of Card 3 from the 4 sheets of pattern paper.

Card 1

Card 2

Card 3

This is the Metric measurement cutting guide. You only need 3 of the 5.8cm x 3cm for Card 3, so you will have 20 of these pieces from the 4 sheets which means that you will have 2 left as scraps at the end of your card making.  

I have also included the Imperial Measurements.

The Scalloped Stitched Rectangle is from the Stitched So Sweetly Dies and the sentiment panel is from the Stitched Rectangle Dies.  The gorgeous Poinsettia was made using the Poinsettia Dies and the stamp set I used is Itty Bitty Christmas. 

I love the Beaded Pearls that I have used for the Poinsettia Flower centre.  

Hope you enjoyed the projects for Day 1 of the Feels Like Frost Designer Series Paper.

If you live in Australia

you can get all the supplies you need

for this project from me.

You can place an order online or Contact Me and place an order. 

SHOP WITH ME! 

Thank you for visiting.

Carolyn

Share:facebook - twitter - pinterest

Feels Like Frost Designer Series Paper - Day 1