Showing posts with label Celebrate With Tags. Show all posts
Showing posts with label Celebrate With Tags. Show all posts

Sunday, 19 February 2023

Abstract Beauty Designer Series Paper

Hi everyone, I have been using up my stash of Designer Series Paper making cards for the Nursing Home that took such good care of my Mum and also for the cards I sell at work with the proceeds going to the Council Council of WA.

I have used up my stash of Abstract Beauty Designer Series Paper.  This is currently available on the clearance rack for $10.40 AUD.  I had two partially used packs and ended up making 125 cards over a two week period.


This is just some of the cards I made, I made multiples of the same design.  The paper scraps were kept to a minimum, I managed to use up most the off cuts and small strips, there were a few small pieces left but these were too small to use.  I used some of the small strips to decorate the inside of the cards.


This card design I cased from Call Me Crafty Al's January 2023 Sheetload of Cards.  Alisha's card design is for a Mini Slimline, I just adjusted the measurements for a normal sized card.


This card design is one that I have used a lot as it uses the 2.5cm x 10.2cm strips which a quite often left from projects.  The sketch is 'As You See It Challenge' sketch #254.


This card sketch is from Try Stampin' On Tuesday, it is sketch number #305.  This card is one of my favourites.


This sketch from My Favouorite Things is great for using small pieces of Designer Series Paper as the centre strip covers any gaps that are created by adhering the 2.5cm x 5.1cm pieces to the cardstock mats which are cut at 8cm x 5.1cm.  The centre strip mat is cut at 13.5cm x 3.3cm and the small pieces of Designer Series Paper cut at 5.1cm x 2.9cm.  I made 3 of these cards using all the small off cuts and strips.


This card design is based on Call Me Crafty Al's February 2022 Sheetload of cards template.  I individually matted the strips instead of adhering the strips onto a larger piece of cardstock.


I have used the Mojo Monday Sketch #444 for this card. I love using card sketches as it makes card making a lot easier.


This another card design using the Call Me Crafty Al's February 2022 Sheetload of cards template.  This sketch is great for using strips of Designer Series Paper.  It is also a great sketch to use for the larger sentiments on your cards


This is a real scrappy card, using all the small left over strips.  I do not know where this idea originated as I have seen a lot of these cards on Pinterest.


This card uses Mojo Monday Sketch #323.  The Designer Series Paper was cut at 7cm x 12.7cm, the mat was cut at 7.4cm x 13.1cm, the sentiment is a 4cm x 3cm rectangle die cut using the Rectangle Stitched Framelits Dies and the circle is 5cm cut using the Stylish Shapes Dies.  I used the 3.2cm x 15.2cm strip on the next card.


For this card cut the 3.2cm x 15.2cm strips (I used 6 strips which made 4 cards)  into 3.2cm x 7.6cm pieces and adhere these onto mats cut at 3.6cm x 8cm.  Cut the Designer Series Paper strip for the centre at 7cm x 2.5cm and 5.5cm x 2.5cm (I used 8 pieces of 2.5cm x 10.2cm), and the mat at 3cm x 13cm.   There were some small strips left which I used to decorate the inside of the cards.


This card sketch is from Jess Crafts. Jess has some great sketches and cutting guides to get the most out of your Desinger Series Paper. I changed the measurements so you could get two cards from one piece of 10.2cn x 15.2cm (6" x 4") piece of Designer Series Paper.  I cut the piece in half on the 15.2cm edge so you end up with two pieces 7.6cm x 10.2cm (3" x 4").  Cut this piece into 3 pieces one at 7.6cm x 6cm and 2 pieces 7.6cm x 2.1cm.


These cards were made using another sketch from Jess Crafts.  It is Jess Crafts 6" x 6" Paper Buster #4.


I made 16 cards using this sketch, 8 of each colour way.  The tag was created using the Celebrate With Tags stamp set and the Celebrations Tag Dies.


The card is based on the January 2023 Mini Slimline template from Call Me Crafty Al.  I have adjusted the sizing to create normal sized cards.


I made 6 of these cards, 3 in each colour way using the left over pieces from the previous project.


I made 6 of these cards using the Mojo Monday Sketch #323.  Instead of a sold piece of Designer Series Paper I used the smaller left over pieces from the previous projects. 


This card sketch is from Try Stampin' On Tuesday, it is sketch number #305.  I just moved where the sentiment was situated on the card design.


This is totally a scrap design using the left over strips.  I made 8 of these cards.

I have no idea if this is a card sketch I created or adapted from another sketch, however if is I have not been able to find where it came from.  It is great for using 10.2cm x 15.2cm (4" x 6") Desinger Series Paper Packs.

Cut the Designer series paper at 9.3cm x 5.1cm and the cardsock mat at 9.6cm x 5.4cm, the next layer you can use Desinger Series Paper or cardstock cut at 11.3cm x 7.1cm and the cardstock mat at 11.6cm x 7.4cm

Hope you enjoyed these projects using the Abstract Beauty Designer Series Paper.

If you live in Australia

you can get all the supplies you need
for this project from me.

You can place an order online or Contact Me and place an order. 


Thank you for visiting.
Carolyn

Monday, 10 October 2022

World Card Making Day - Project 5

Hi everyone, sharing Project 5 from the World Card Making Day event.

This project uses the Lights Aglow Speciality Designer Series Paper and Celebrate With Tags stamp set.


Measurements

Cherry Cobbler card base
DSP 13.5cm x 5cm
DSP 5.7cm x 4.1cm
DSP 7.5cm x 4.1cm
DSP Gold printed square 7.5cm x 7.5cm
Gold Foil Sheet 7.9cm x 7.9cm
Cherry Cobbler cardstock 8.3cm x 8.3cm
Gold Metallic Specialty Paper 7.5cm x 7.5cm for the snowflakes
Very Vanilla cardstock for sentiment circle
Very Vanilla cardstock mat 10cm x 14.3cm (for card inside)

Hope you enjoyed this project.

If you live in Australia

you can get all the supplies you need
for this project from me.

You can place an order online or Contact Me and place an order. 


Thank you for visiting.
Carolyn

Sunday, 3 July 2022

Just Add Ink #610 - Inspiration

Hi everyone, I am playing along this week with the challenge at Just Add Ink.  It has been awhile since I have played along with this challenge and as soon as I saw the inspiration picture with all the balloons I immediately wanted to get creating.


The challenge this week is to create a project using the picture for inspiration.


I immediately thought of the Celebrate With Tags stamp set and the maching Celebrations Tag Dies to create this fun birthday card with all the balloons.  I do not think I have even made a tag with the bundle yet, it is so great for making cards.

I have used the colours of Fresh Freesia, Daffodil Delight, Polished Pink, Parakeet Party and Tahitian Tide to stamp all the balloons on a Thick Basic White Cardstock base.   The sentiment was white heat embossed on a piece of Basic Black Cardstock and die cut using the label die in the Celebrations Tag Dies,  The Polished Pink flag end banner behind the sentiment was cut using the Stylish Shapes Dies.  

I hope you enjoyed this fun project.

Thank you for visiting.
Carolyn

Sunday, 26 June 2022

Zig Zag Birthday

Hi everyone, sharing one of the cards I have been creating in the last few weeks.  I know that I have not posted any projects in the last month, however I was creating and preparing kits for a fundraiser that I held yesterday for the Juvenile Diabetes Research Foundation.  I will be posting the projects from the fundraiser over the next two weeks.

This card uses the Basic Border Dies and also a new bundle from the July-December 2022 Mini Catalogue called Celebrate with Tags.


The Zig Zag strips were created by cutting 12cm x 1.5cm strips of Designer Series Paper from the 2022-2023 In Color 6" x 6" Designer Series Paper Assortments.  I used the colours of Sweet Sorbet, Tahitian Tide and Parakeet Party.  I also cut two strips of Basic Black Cardstock, one at 12cm x 1.5cm and the other at 12cm x 2cm. 

To create the Zig Zag strip, line up the Zig Zag die on the top edge and die cut.  Then line up the die on the bottom edge and die cut.  

The balloons and sentiment are from the Celebrate With Tags Bundle in the July-December 2022 Mini Catalogue.  I have stamped the ballons in Sweet Sorbet, Tahitian Tide and Parakeet Party before die cutting them.  The sentiment was stamped using Black Memento ink and die cut using the one of the label dies in the Celebrations Tag Dies which is part of the bundle.

This is a fun way to use the Basic Border Dies.  Hope you enjoyed this project.

If you live in Australia

you can get all the supplies you need
for this project from me.

You can place an order online or Contact Me and place an order. 


Thank you for visiting

Carolyn